RHYTHM M440-QXEZ, User Manual, Page: 14 / 20

１4
The following figure shows an example of the clock. So, actual design of the clock may differ from this figure.
Name Of Each Component
Flashing and illuminating of the lamp shows status or
result of receiving radio waves.
Verify the status of radio waves.
Reception is successful:
receiving indication lamp illuminates (5 sec.)
Reception failure:
receiving indication lamp flashes (5 sec.)
When radio waves can not be received, time can be
adjusted by manual operation.
If this button is pressed carelessly, time will change.
Press the compulsory receiving button
when the location is changed, the display is
incorrect, or when replacing the batteries.
This button is used to verify the
result of light sensor.
For details to p.16.
RECEIVING INDICATION LAMP
SLEEP MONITOR button
COMPULSORY RECEIVING button
RECEIVING CHECK button
TIME SETTING button
RADIO WAVE RECEPTION switch
ON Time is adjusted automatically.
OFF The clock will then keep time with quartz precision.
Pull
Back cover
① ②
①
②
Pedulum rod supporter.
Attach The Pendulum To Clock Insert batteries into the battery holders
Remove The Back Cover
Pendulum
Second hand
Hour hand Minute hand
Light sensor
position of the pendulum rod
1.5V 1.5V
ƒAƒ‹ƒJƒŠ ƒAƒ‹ƒJƒŠ
1.5V 1.5V
ƒAƒ‹ƒJƒŠ ƒAƒ‹ƒJƒŠ
Two 1.5V “C” size alkaline batteries.
Turn the cli p