OPERATING INSTRUCTIONS
SAFETY PRECAUTIONS
After assembly, test to make sure that all bed sections are properly and
securely installed and operate correctly BEFORE use.
Close supervision is necessary when this product is used by the head or
near children or physically challenged adults.
Pendant Control
NOTE: In the event of a power failure, the 9V battery will allow the head
and foot sections to be lowered. It will not lift the head or foot sections.
SEMI PENDANT CONTROL
FULL PENDANT CONTROL
Optional Fixed Leg Height Adjustment
Hand Crank for Semi Electric Bed and Full Bed (Located at foot of bed)
Use the 4 Locking Pins to lock the height of the legs at a fixed setting.
Before attempting to manually adjust the bed height, make sure to
remove the optional height adjustment lock pins from each leg if being used.
To raise the bed, turn the hand crank clockwise.
To lower the bed, turn the hand crank counter-clockwise.
When using the emergency hand crank with the full electric bed during
power outages, be sure to remove Hand Crank and clip it back to the Foot Board.
If left in place, it will turn when motor is running and could cause personal injury
or damage to the bed.
Secure the pendant and power cords properly so that they do not become
damaged during operation and do not present a tripping hazard. NEVER operate
the bed if these cords are damaged.
The information contained in this document is subject
to change without notice.
Raise Head
Lower Head
Raise Foot
Lower Foot
Raise Head
Raise Foot
Lower Head
Lower Foot
Lower Head &
Foot Together
Raise Head &
Foot Together
5
