25
3-3 Parameter Copy ; Restore Default Value; Save/Restore Setting Value
a. Parameter Copy
﹕
Including writing and reading out functions. Parameter settings of two drives can
be copied by
“
” and “
” functions via keypad
a-1. (Parameter Read Out: Drive parameter
Keypad)
Operation steps
Display
1.In the monitor mode, press
PROG
key to enter
function setting mode.
2.Press
▼
or
▲
key to select the function to F154
(Default Setting) and then press
FUN
DATA
key to enter
parameter setting mode.
RUN
CRG
MAIN
SV
PV
3.Press
▲
key and then select
parameter and then press
FUN
DATA
key to execute the
parameter readout.
RUN
CRG
MAIN
SV
PV
4.Drive will start to copy the parameters to keypad,
and then display the copy process on keypad.
RUN
CRG
MAIN
SV
PV
5.After completing the copy, the keypad will display
message and automatically back to
function setting mode.
RUN
CRG
MAIN
SV
PV
a-2. (Parameter Write In: Keypad parameter
Drive)
Operation steps
Display
1.In the monitor mode, press
PROG
key to enter
function setting mode.
2.Press
▼
or
▲
key to select the function to F154
(Default Setting) and then press
FUN
DATA
key to enter
parameter setting mode.
3.Press
▲
key and then select
parameter and then press
FUN
DATA
key to execute the
writing.
RUN
CRG
MAIN
SV
PV
4.Keypad will start to copy the parameters to drive,
and then display the copy process on keypad.
RUN
CRG
MAIN
SV
PV
5.After completing the copy, the keypad will display
message and automatically back to
function setting mode.
RUN
CRG
MAIN
SV
PV
RUN
CRG
MAIN
SV
PV
RUN
CRG
MAIN
SV
PV
RUN
CRG
MAIN
SV
PV