RHINO RX5 Operator'S Manual Download | Manualshive

Page: 98 / 156

background image

OPERATION

RX5-RX6 02/10

Operation Section 4-4

© 2010 Alamo Group Inc.

OPERA

T

ION

2. OPERATOR REQUIREMENTS

Safe operation of the unit is the responsibility of a qualified operator.  A qualified operator has read and
understands the implement and tractor Operator’s Manuals and is experienced in implement and tractor
operation and all associated safety practices.  In addition to the safety messages contained in this manual,
safety signs are affixed to the implement and tractor.  If any part of the operation and safe use of this
equipment is not completely understood, consult an authorized dealer for a complete explanation.

If the operator cannot read the manuals for themselves or does not completely understand the operation of the
equipment, it is the responsibility of the supervisor to read and explain the manuals, safety practices, and
operating instructions to the operator.

Safe operation of equipment requires that the operator wear approved Personal Protective Equipment (PPE)
for the job conditions when attaching, operating, servicing, and repairing the equipment. PPE is designed to
provide operator protection and includes the following safety wear:

PERSONAL PROTECTIVE EQUIPMENT (PPE)

•

Always Wear Safety Glasses

•

Hard Hat

•

Steel Toe Safety Footwear

•

Gloves

•

Hearing Protection

•

Close Fitting Clothing

•

Respirator or Filter Mask (depends on
operating conditions)

OPS-U- 0002

DO NOT use drugs or alcohol immediately before or while operating the
Tractor and Implement. Drugs and alcohol will affect an operator’s
alertness and coordination and therefore affect the operator’s ability to
operate the equipment safely. Before operating the Tractor or Implement,
an operator on prescription or over-the-counter medication must consult
a medical professional regarding any side effects of the medication that
would hinder their ability to operate the Equipment safely. NEVER
knowingly allow anyone to operate this equipment when their alertness or
coordination is impaired. Serious injury or death to the operator or others
could result if the operator is under the influence of drugs or alcohol.

(SG-27)

«
...
96
97
98
99
100
...
»

Summary of Contents for RX5





























































































































































Reviews:

No comments

Related manuals for RX5

Brand: Baroness Pages: 325

LazerCut LCS405

Brand: SANLI Pages: 19

PERFECT ZW Series

Brand: VAN WAMEL Pages: 69

Brand: Trueshopping Pages: 107

Brand: BOXER AGRI Pages: 15

Brand: MTD Pages: 36

Brand: Weed Eater Pages: 13

Brand: MID WEST PRODUCTS Pages: 4

Brand: VITO GARDEN Pages: 20

Brand: Kubota Pages: 24

Brand: VITO GARDEN Pages: 66

Brand: Cub Cadet Pages: 16

Brand: Cub Cadet Pages: 20

Brand: Cub Cadet Pages: 18

Brand: Cub Cadet Pages: 20

Brand: Cub Cadet Pages: 19

Brand: Cub Cadet Pages: 32

BLUE POWER 34 E

Brand: Wolf Garten Pages: 138

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands