Page | 16
c) This pop Window enables us to write data in HEX value to the drive in different Address Registers. Eg. When we
write HEX value 0101 in the Address register 2 with a slave ID 7, this command will enable the Digital speed
control mode of the drive.
d) Once the data is input in the window, click send.
e) Response OK message will be displayed as per below.
f)
Once the response OK is received, it means that the data setting is complete.
g) The complete list of registers for drive settings and their functionality and examples are provided in Appendix 1.
h) This concludes
STEP4
of the configuration procedure.
