background image

If removing this feature is a necessity, this can be achieved by connecting both the 

positive and negative power feed directly on to the car battery, this will override the 

current sensing feature in most cases.

 

 
 
 

               LOCK (ORANGE WIRE ON RCA)
                                                                                                    15A FUSE                      +12V

 (YELLOW PINK)            87                            87
             UNLOCK             87a                          87a
                                    86          85             86          85
                                             30                          30
                                                                                           LOCK OUTPUT

                                                                                      UNLOCK OUTPUT

INSTALL NEW DOOR LOCK MOTORS

 

 
 

               LOCK (ORANGE WIRE ON RCA)
                                                                                                    15A FUSE                 +12V

 (YELLOW PINK)            87                           87
             UNLOCK             87a                         87a
                                    86          85           86          85              MASTER LOCK SWITCH
                                          30                          30

                                                         LOCK OUTPUT

                                                          UNLOVK OUTPUT

                                                                TO EXISTING LOCK RELAY     +12V

5-WIRE “POLARITY REVERSING” POWER LOCK SYSTEM

 

 

          LOCK (ORANGE / BLACK FROM RCA)
                                                                                 TO EXISTING DOOR
                                                                                  RELAYS
          UNLOCK (YELLOW / PINK FROM RCA)

”NEGATIVE TRIGGER” ORIGINAL POWER LOCK SYSTEM

 

Summary of Contents for RCA









Reviews: