RHINO RC-12, Operator'S Manual

Page: 45 / 94

OPERATION
RC12 12/05 Operation Section 4-3
© 2005 Alamo Group Inc.
OPERA
T
ION
1. Standard Equipment and Specifications
RC 12
Cutting Width 144”
Overall Width 156”
Cutting Height Range 1-18”
Cuttershaft Diameter 10-3/4”
Lift Type Hitch CAT II-III Q.H.
Semi Mount Hitch CAT II-III Q.H.
Pull Type Hitch Clevis
Min. HP Required (Lift type*) 90 HP
Min. HP Required (Semi-Mount) 90 HP
Min. HP Required (Pull type) 90 HP
Gearbox Rating** 207 HP
Blade Tip Speed 12,620 FPM
Rotor Speed 2000 RPM
Number of Knives 128
Driveline Size CAT 5 or 6
Hood Thickness 3/16”
End Plate Thickness 1/4 “
Drive Belt 5 x 5V, Banded
Front Safety Deflectors Std.
Weight (Approx.) 4025 lbs.
*with adequate front weights
**1000 RPM
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor. Operating this Mower
in an application for which it is not designed and/or operating the Mower with the wrong size Tractor can cause
Mower component damage and equipment failure resulting in possible serious injury or death.
(SGM-14)