manualshive.com logo in svg

RHINO Multi-Pro 301002, Owner'S Manual

Share
Download
RHINO Multi-Pro 301002 Owner'S Manual Download Page 7

•  Ensure the post driver has no loose com-

ponents. Loose components lead to high 

vibration levels.

•  Maintain a firm grip at all times, but do 

not squeeze the handles with constant, 

excessive pressure. Take frequent 

breaks.

All of the above mentioned precautions 

do not guarantee that you will not sustain 

white finger disease or carpal tunnel syn

-

drome. Therefore, continual and regular 

users should closely monitor the condi-

tion of their hands and fingers. If any of 

the above symptoms appear, seek medical 

advice immediately.

DO NOT

 modify this 

power tool in any way.

DO NOT

 put anything 

other than a post into 

the chuck on the driver.

DO NOT

 operate your 

post driver unless it 

is on a post to be driven. Operation of the 

driver without it driving on a post could 

damage the power tool.

SURROUNDINGS: 

This power tool emits 

noise at 100 Db, which may be disturbing 

to animals and livestock. Ensure prior to 

operation, that any livestock are cleared 

from the operational area to prevent a situ-

ation in which startled livestock become a 

safety hazard.

WARNING LABELS

If your post driver’s warning label is 

marred or destroyed, replace it immedi-

ately. Simply call Rhino Tool Company 

and we will send you a new warning label 

at no expense to you.

End of Life Cycle

When your Rhino

®

 gas powered driver is 

coming to the end of its life cycle, destruc-

tion of the unit should to be conducted 

according to international and local envi-

ronmental regulations.
The gas powered post driver contains:
• Fuel

• Oil
• Rhino

®

 Pro Series Lubricant

•  Electric components
•  Plastic-steel and aluminum components.

POST DRIVER SAFETY... continued

IMPORTANT SAFETY INFORMATION

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

!

WARNING

!

DANGER

!

CAUTION

IMPORTANT

NOTE

Rhino

®

 Multi-Pro

™

 

Specifications 

imperial (metric)

Overall 
Dimensions

10.75 x 17 x 26 in.  
(273 x 432 x 660 mm)

Weight

44 lb (19.9 kg)

Engine  

Configuration

4-stroke, 35.8 cc

Performance

1720 bpm

Fuel

Unleaded Gas, US 86 Octane 

(>Euro 91)

Fuel Capacity

0.67 US qt. (0.63 ltr)

Engine Oil

SAE 10W-30

Lubricant

Rhino

®

 Pro Series Lubricant

Noise

≤ 100 Db

Vibration

TBC

5

Summary of Contents for Multi-Pro 301002

































Reviews:

No comments

Brands by name

Popular brands

Load more brands