RHINO 2407TL, Operator'S Manual

Page: 83 / 100

OPERATION
2407TL 01/11 Operation Section 4-43
© 2011 Alamo Group Inc.
OPERA
T
ION
PROBLEM POSSIBLE CAUSE REMEDY
Insufficient lift capacity Load is greater than boom Check loader specifications.
lift capacity.
Improper hydraulic pump
Repair or replace pump.
operation.
Internal lift cylinder leakage.
Replace any worn parts and install
a seal repair kit. See “Cylinder
Service”.
Improper hydraulic valve Repair or replace valve.
operation.
Excessive wear on bucket Bucket is riding on cutting Use boom “FLOAT” position or
cutting edge edge instead of wear runners. bucket level indicator to ensure
bucket rides
Bucket cutting edge not Rear axle on tractor not level With tractor on level surface,
flat on theground. from side to side compare rear axle height from left to
right, measuring from axle center
toground. Adjust air pressure in rear
tires until axle height measures the
same for both sides.