Step 3.
It is important that your cover is laying square over the
frame before you start ratcheting down the cover. Once the cover is
even on all four sides, slowly start ratcheting down all four corners.
Warning: Do not over tighten the ratchet straps.
Pay close attention to how tight the cover is put onto the frame. It
should be tight enough so it does not flap around in the wind, but not
so tight that it tears the material cover. The fabric backed PE fabric
of Rhino Shelter units does not stretch. If you pull it so tight that the
fabric is stretched, a small amount of additional stress from wind or
contact can cause premature tears and material failure. Only tighten
cover enough to remove valleys between arch assemblies. Do Not
over tighten.
Once the ratchet starts becoming harder to tighten stop so you
do not damage the cover.
7
Do NOT Return Assembly To Dealer or Store. For All Questions or Shortages Please Call MDM Products Directly
Customer Service 800-447-7079 or 203-877-7070
