![background image](http://html1.mh-extra.com/html/eureka-tents/copper-canyon-4-and-6-tents/copper-canyon-4-and-6-tents_assembly-instructions_2436110001.webp)
Component List:
1 Tent Body with Guy Ropes, 4 Wall Poles, 2 Roof Poles,
1 Fly, 1 Carry Bag, 1 Stake Bag and Stakes, 1 Pole Bag
Assemble the long roof poles
and slide them through the
sleeves, diagonally across
the roof.
Insert the ferrules into the
ribbed section of the
corner elbows.
Spread the tent out with the top side up.
Raise one side of the roof and
insert the wall poles into the
the bottom of the elbows.
Drape the fly over the tent so
that the yellow webs meet.
Then pull the fabric out and
over the corner elbows.
Insert the pin from the
corner web/rings into
the bottom ferrules.
Raise the other side to make a freestanding structure.
Again at the corners, attach the J-hooks
to the nylon rings on the webs.
Lastly, this a tall, straight sided tent; it is
important
that you stake out all of the guylines.
ASSEMBLY INSTRUCTIONS:
Copper Canyon 4 & 6 Tents
YOUR TENT IS READY !
REV A 6.11
Roof poles
Wall poles
Clip the tent to the wall poles.
Then dress out the
tent as you stake
the web loops down.
At the corners, reach under the fly
and wrap the hook & loop straps
around the wall poles.