Page 2 of 3
RBCA030 Axle Adaptor including 15 x 100mm Insert.
Item
Component Name
Qty
Part No.
1
Thru Axle Insert 15 x 100mm
1
CA1523
2
Thru Axle Adaptor
1
CA1522
3
M6 Grub Screws
2
B238
4
3mm Allen Key
1
H010
5
Thru Axle Insert 12 x 100mm
1
RBCA031
6
Thru Axle Insert 20 x 110mm
1
RBCA038
7
Instructions
1
R906
Item
Additional Thru Axle Sizes (sold as separate).
Part No.
1
Thru Axle Insert 9 x 135mm
RBAC039
2
Thru Axle Insert 12 x 100mm
RBCA031
3
Thru Axle Insert 15 x 150mm
RBCA037
4
Thru Axle Insert 15 x 110mm
RBCA036
5
Thru Axle Insert 20 x 110mm
RBCA038
Instructions
1.
6.
2.
1
Remove the front wheel from your bike.
2
Slide the Thru Axle into the Adaptor. Be sure the
Thru Axle sits evenly in position as shown.
=
=
3
Insert the Grub Screws provided. Tighten in place
with a 3mm Allen Key. Do not over-tighten.
4
Fix the Adaptor to the bike by re-installing the
bikes’s axle.
5
Slide the two ends of the Quick Release Skewer (found in RCB035 and RCB036) into their respective
Carrier. Loosely install the skewer as per the bike carrier instructions.
1. Slide the two ends of the
Quick Release Skewer into the
assembly. Turn clockwise to
tighten.
2. Leave enough
space for the fork
of the bike (with
Adaptor installed)
to be seated onto
the Quick Release
Skewer.
Note: Be sure to identify correct size Thru Axle for
your bike. Additional sizes can be purchased to suit
most bikes. Installation requires 3mm Allen Key.
Bike Front Fork.
Bike Axle.
Thru Axle Adaptor.
4.
5.
3.
