Page 3 of 3
RBCA030 Axle Adaptor including 15 x 100mm Insert.
6
Place the bike onto the Carrier. The Thru Axle
Adaptor will sit onto the exposed sections of the
Quick Release Skewer as shown. Tighten and lock
in place (Skewer tightening detailed in RBC035/
RBC036).
7
Secure the Bike Carrier before use.
Tighten the Carrier’s
Rear Wheel Strap.
Be sure to
tighten and lock
Skewer before
use.
Note
For Mounting two or more bikes side by side,
alternate the orientation of the Adaptor when
installed. This will minimise the contact of
handlebars with the bike opposite.
Adaptors installed in
alternate orientation
when two or more
bikes are to be carried.
Note:
-Be sure fi xtures are secure
before use.
-Periodically check torque on
fi xtures.
Front View: The
Adaptor must sit
fl ush with the top
of the Carrier as
shown.
