6
Fit Side Support Mouldings and Rail End Moulding
Slide the side supports and end mouldings into the side rail extrusions as shown below and fasten with screws.
Screw
Side Support
End Moulding
7
Insert First Channel Nuts into Slots
Lower the rail assembly onto the tray so that the channel
nuts fitted to the end mouldings locate within the slots at
the front of the tray.
Next slide the rail assembly onto the tray slightly so the
nuts engage in the channel.
End Moulding
M8 Channel Nut
Slot
5
Fit Side Rail Extrusions to End Rail Assembly
Slide the side rail extrusions onto the ends of the corner
mouldings as shown and fasten with screws.
Side Rail Extrusion
End Rail Assembly
Screw
Page 4 of 7
Rhino Pioneer Front / Side Rail Kit
