RHINO MOTION CONTROLS
RMCS-3001
Brushless DC motor Driver
(Max. 48VDC and 5A per phase)
Page 4
BLDC Motor Drive [RMCS-3001]
Chapter 1: Safety Precautions:
For the sake of personal safety and avoidance of property loss, please read these safety
precautions carefully before testing and using the driver. The following safety measures
must be strictly followed
1.1 Before operation:
Read this document carefully before installing and utilizing the drive
Use multi-meter to verify the voltage supplied is within Maximum ratings.
Never plug or unplug motor terminals while the driver is in ON condition; else it may
damage the driver.
To avoid personal injury and property loss, only qualified and service-trained personnel
should operate the driver.
Do not insert any object into the driver, which may cause damage to the driver.
If any fault occurs to the driver while operations, please return it for maintenance/repair.
Trying to repair the driver without any authorization or improper operation may cause
damage to the driver and void the warranty clause.
1.2 Electrical safety measures:
Input voltage to the driver must not exceed the maximum of 48VDC.
Supplying Reverse polarity input voltage will damage the Driver.
Connecting the power supply wires to the motor coil terminals will damage the
driver.
Excess humidity or condensation can damage the driver.
Heat sink is designed to dissipate heat from the driver circuitry as long as the
ambient temperature is less that 70ºC degrees Celsius. Ambient temperature in
excess of that may damage the driver.
While changing the Direction, apply 5V or 0V to DIR pin. Power reset is necessary for
implementing Dir change.
