RHINO MOTION CONTROLS
RMCS-3001
Brushless DC motor Driver
(Max. 48VDC and 5A per phase)
Page 10
BLDC Motor Drive [RMCS-3001]
Current:
Clockwise (CW) rotation to increase Current
Counter Clock-wise (CCW) rotation to decrease Current
Chapter 4: Trouble Shooting:
4.1 Self testing:
The user can self test the driver if the power supply section is OK (if green LED glows).
For self testing connect the motor phase properly and make sure that LED status is
correct. Supply the 3.3v/5V to enable pin to enable the rotation of motor shaft. Also
change the current settings in potentiometer if necessary. Current setting
potentiometer is provided inside the drive. You need to remove the top to change the
current gain. Speed can be altered using external potentiometer. Also check whether
direction and Brake states are working by connecting the corresponding pins to +5V
with respect to ground. These are the steps to check the basic functionality of a drive.
4.2 User Level Trouble Shooting Guide:
The table given below shows some user level trouble shooting tips which may useful
while working with RMCS-3001 with an external pulse generator.
