13
7. Paper Amount Adjustment Knob:
Set the adjustment knob clockwise to increase the number of sheets and
counterclockwise to decrease the number of sheets. Depending on the model
punch and type of die being used, this amount will vary. Use a comfortable
setting so the sheets fit into the die without much effort. The Green area is the
normal setting for narrow mouth dies, the yellow indicated the wider mouth
dies such as 3-Hole, VELO
TM GBC
, and Comb. The PAL-14 is not a paper
counter. The amount of paper can vary a small amount. This is usually do to
the paper relaxing which causes the pile to grow in height or the pile
compressing as the stabber enters which causes the pile to shrink. Normally,
it will vary only by a few sheets so unless you have the amount setting to
high, the paper will enter the die with no problem.
Paper Separating and Punching:
The PAL-14 has been designed to save time by always having a predetermined
amount of paper lifted from the pile, and ready for an operator to insert either into
a paper punch or the APES-14 attachment. Set the paper adjustment knob so
the stabber lifts an amount of paper which comfortably fits into the die slot. The
machine and type of die being used will determine how much paper can be
picked. The label should only be used as a reference.
Summary of Contents for Onyx PAL-14 Piks-A-Lift
Page 16: ...16 Schematics ...
