CAUTION: INCORRECT POSITIONING
OF THE
DRAIN HOSE
.
CAUTION: CORRECT
POSI
TIONING
OF THE
DRAIN HOSE.
The GS-40 has a drain pump and is supplied with a grey outlet hose which must have
a fixed watertight seal above the tundish in accordance with Australian Standard
AS/NZS 3500.2. It is still recommended that the tundish be lower than the appliance
outlet. Cut the outlet hose to suit. A trap must be fitted in the drain line. If required
a grease trap must be installed between the appliance and the building's drain
system, check local codes
.
The drain pipe should withstand 70°C (158°F) in continuous duty conditions.
WASTE PIPE
FROM
DISHWASHER
AIR BREAK TO
REGULATION
NOT
MAXIMUM
HEIGHT
TO
ABOVE
EXCEED 20MM
DISHWASHER
NOT
RECOMMENDED
PUMPED WASTE
TUNDISH &
TRAP BY
PLUMBER
The diagrams above show the correct method of waste installation.
6
ATS5200.101
WMKT 22203
INSTALLATION TO BE IN ACCORDANCE WITH
AUSTRALIAN STANDARD AS/NZS 3500.2
