Rheem RLKN-B073 Series, Installation Instructions Manual, Page: 22 / 28

22
XXI. OPERATION
IMPORTANT: The compressor has an internal overload protector. Under some condi-
tions, it can take up to 2 hours for this overload to reset. Make sure overload has had
time to reset before condemning the compressor.
CONTROL SYSTEM OPERATION
1. In the cooling mode, the thermostat will, on a call for cooling, energize the com-
pressor contactor and the indoor blower relay. The indoor blower can be operated
continuously by setting the thermostat fan switch at the “ON” position.
XXII. AUXILIARY HEAT
In the heating mode, the thermostat will energize one or more supplementary resist-
ance heaters.
XXIII. REPLACEMENT PARTS
Contact your local distributor for a complete parts list.
XXIV.CHARGE INFORMATION
Refer to the appropriate charge chart included in this manual.
XXV. TROUBLESHOOTING
Refer to the troubleshooting chart included in this manual.
XXVI. WIRING DIAGRAMS
Refer to the appropriate wiring diagram included in this manual.
ONLy ELECTRIC hEATER KITS Sup-
pLIED By ThIS MANufACTuRER AS
DESCRIBED IN ThIS puBLICATION
hAVE BEEN DESIgNED, TESTED,
AND EVALuATED By A NATIONALLy
RECOgNIzED SAfETy TESTINg
AgENCy fOR uSE wITh ThIS uNIT.
uSE Of ANy OThER MANufAC-
TuRED ELECTRIC hEATERS
INSTALLED wIThIN ThIS uNIT MAy
CAuSE hAzARDOuS CONDITIONS
RESuLTINg IN pROpERTy DAMAgE,
fIRE, BODILy INjuRy OR DEATh.
s
WARNING
!