Rheem Prestige R96V series, User Manual

Page: 3 / 12

Air
Standard & Optional Equipment
R96V Series
3
STANDARD EQUIPMENT
Completely assembled and wired; blocked drain sensor, 7
segment LED and marked hoses; heat exchanger; primary:
aluminized steel, secondary: 29-4C stainless steel; 2 stage
induced draft; pressure switches; redundant 2 stage main gas
control; blower compartment door safety switch; solid state
time on/off blower control; limit controls; manual shut-off
valve; 100% safety lock out; cool fan off delay; field selectable
heat fan off delay; one hour automatic retry; power and self-
test diagnostics; flame sense current diagnostics; electronic
air cleaner connections; twinning (built-in) features; humidifier
connections; humidifier on/off delay; low speed continuous fan
option; single speed option for heating and cooling applica-
tions; transformer; direct drive, variable speed electrically
commutated blower motor (ECM). Solid bottom. (Please note:
a thermostat is not included as standard equipment.)
OPTIONAL EQUIPMENT
Side and bottom filter racks; return air cabinet for all sizes.
NOTE: Furnace is not listed for use with fuels other than natural
or L.P. (propane) gas.
All models can be converted by a qualified distributor or local
service dealer to use L.P. (propane) gas without changing burn-
ers. Factory approved kits must be used to convert from
natural to L.P. (propane) gas and may be ordered as optional
accessories from a parts distributor.
For L.P. (propane) operation, refer to Conversion Kit Index Form.
WARNING
THIS FURNACE IS NOT APPROVED
OR RECOMMENDED
FOR USE IN MOBILE HOMES
PRIMARY AND SECONDARY
HEAT EXCHANGER
IN-SHOT BURNERS
PRESSURE SWITCHES
DRAFT
INDUCER
CONTROL BOARD
GAS VALVE AND MANIFOLD
DIRECT SPARK IGNITION &
REMOTE SENSOR
REMOTE
SENSOR
BLOCKED DRAIN
SENSOR
ECM MOTOR