Installation
Thermostat
Over
vie
w
Thermostat
Setup
Ad
vanced
Installer Men
u
Installer’s Guide
7
Equipment
User Men
us
Initial Power Up
Turn on AC power to the system. The thermostat will
automatically identify the communicating equipment
installed and configure for the equipment as required.
Messages at Thermostat
As equipment is found on the network, the display will
show,
“device” Found. The Searching icon will show until
all equipment is found and configured. If no equipment is
found on the network after approximately five minutes, the
home screen will appear and indicate a Fault.
If the indoor unit is not detected by the network,
“Check
System Fault” will be found.
Check system wiring if one of these faults occur.
