Page 15 of 22
OPERATION
Once the UV reactor and power supply have been correctly installed and tested for leakage, operation
is as follows;
1.
Ensure any valve is open to allow water flow through the UV disinfection unit.
2.
Insert the power lead into the mains power source and switch on the power. The UV lamp will
ignite and come on, however it will take between 2 and 5 minutes for the lamp to reach full
output.
3.
The unit will now be operational.
4.
Stop/starting the UV lamp more than 4 times per day will reduce the lamp life time and
efficiency.
5.
It is recommended lamps be replaced after 9000hrs of operation (approximately 1 year).
