INSTALLATION – CONTROLLERS
59
BATHROOM1 AND BATHROOM2 CONTROLLERS
If only one Bathroom controller is to be installed, the Bathroom1 Deluxe controller (Rheem AU - Part 299862,
NZ - Part A299862) must be used. If two Bathroom controllers are to be installed, one must be a Bathroom1
Deluxe controller and the other must be a Bathroom2 Deluxe controller (Rheem AU - Part 299863, NZ -
Part A299863).
They have a minimum temperature setting of 37°C and a maximum temperature setting of:
•
884 series
50°C
•
886 series
50°C
The method of installation for the Bathroom1 Deluxe and Bathroom2 Deluxe controllers is identical.
Choose a suitable location for each Bathroom controller, away from water, heat, and sunlight. The Bathroom
controllers are supplied with a 250 mm length of wire with connectors to mate with the Bathroom controller
cable.
Notes:
•
It is not recommended to have exposed wiring in a bathroom.
•
Do not apply sealant to the controller cable.
Bathroom1 Deluxe and Bathroom2 Deluxe Controller Components
screw x 2
controller screw
base plate
foam packing
Bathroom Deluxe controller
