Rheem 884 Series, Owner'S Manual And Installation Instructions

Page: 20 / 72

TEMPERATURE CONTROL – DELUXE
20
BATHROOM CONTROLLERS – DELUXE
The Bathroom Deluxe controller(s) allows the user to select the temperature setting for the hot water to be
used in the bathroom. They have a minimum temperature setting of 37°C and a maximum temperature
setting of:
• 884 series 50°C
• 886 series 50°C
The Bathroom Deluxe controllers operate in tandem. Whenever an operation is selected on one Bathroom
Deluxe controller, it is also set on the other Bathroom Deluxe controller. The Bathroom Deluxe controllers
automatically have priority (ACTIVE light glows) if they are on.
Important: It is important to turn on the Bathroom Deluxe controller before opening a hot tap in the bathroom
(priority is gained automatically and the ACTIVE light glows). If the Bathroom Deluxe controller is not on and
the Kitchen Deluxe controller is on (will have priority and ACTIVE light glows), then it is possible to receive
water at a temperature higher than expected from a hot tap in the bathroom. This temperature could be up
to:
• 884 series 50°C if a temperature limiting device is installed in the hot pipe to the
bathroom or up to 60°C – AU or 55°C – NZ if a temperature limiting device is
not installed.
•
886 series 50°C
Notes on the Bathroom Deluxe controllers:
• The Deluxe controller cannot be turned on whilst a hot tap is open.
• When a Bathroom Deluxe controller is turned on, it gains priority (ACTIVE light glows) from the Kitchen
Deluxe controller.
• The Bathroom Deluxe controller must be on in order to adjust the temperature setting on the Bathroom
Deluxe controller.
• The Kitchen Deluxe controller can be turned off from a Bathroom Deluxe controller.
Press and hold the ON / OFF button on the Bathroom Deluxe controller for three seconds. This turns off
all the Deluxe controllers, including the bath fill function if it is on, the displays go blank and the lights go
out. If hot water is flowing from a hot tap, it will go cold.
• Warning: It is advised to leave the Bathroom Deluxe controller on after hot water usage is finished in
the bathroom. Turning off a Bathroom Deluxe controller in one bathroom will also turn off the
Bathroom Deluxe controller in the other bathroom. The Kitchen Deluxe controller will gain priority
(ACTIVE light glows) if it is on and the temperature setting can be up to:
„
884 series 60°C – AU 55°C – NZ
„
886 series 50°C
If a hot tap is open in another bathroom, the water will be delivered at up to 50°C for an 886 series
model, or up to 50°C for an 884 series model if a temperature limiting device is installed in the hot pipe
to the bathroom or up to 60°C – AU or 55°C – NZ if a temperature limiting device is not installed.
Rheem
BATH
( l )
4 0
°C
1 2 0
ACTIVE
ON/OFF BATH FILL
B1
BATH FILL
VOLUME
BATH FILL
TEMPERATURE
ACTIVE
Light on
2.
Adjust
Temperature
3.
Open hot
tap
4. Hot Water
Press
1.
ON/OFF
Bath
Water
Volume
Bath
Fill
Temp
Bath Fill
Set Bath Fill Water Volume
and Temperature
1. 2.
Bath Fill
completed
(automatic)
Bath Fill Button
(Red light flashes)
6. Close hot tap
5.
Press Bath
Fill Button
(Red light on)
3.
4. Open hot tap
BATH FILL
Press Bath
Fill Button
(R ed light off)
7.
BATH FILL
Bathroom Deluxe
Controller
front cover
closed
front cover
open