10
KITCHEN CONTROLLER
The Kitchen controller allows the user to select the temperature setting for the hot
water to be used in the kitchen and laundry. It has a maximum temperature setting
of 60ºC and a minimum temperature setting of 37
o
C. The Kitchen controller does
not have priority if a Bathroom controller is on.
To operate the Kitchen controller:
1. Turn off the Bathroom controller/s.
If a temperature setting is displayed and the
priority light is not glowing, it is necessary to
turn off the Bathroom controller/s to gain
priority. See notes below.
2. Turn on the Kitchen controller by
pressing the on/off button.
The light in the on/off button and the priority
light will both glow. The Kitchen controller
temperature setting will be displayed. This
is the lower of the previous setting and 50°C.
3. Select the temperature setting by
pressing the up (
▲
) button or down
(
▼
) button.
Refer to Temperature Adjustment on page
7. The selected temperature setting will be
displayed on all controllers.
4. Open the hot tap.
The in use light will glow on all controllers.
5. Close the hot tap.
The in use light will go out on all controllers.
6. Turn off the Kitchen controller by
pressing the on/off button.
The priority light, on/off light and temperature
display will go out.
Important:
Turn off the Kitchen controller after hot water usage is finished in the
kitchen and/or laundry. Refer to
Important
note for Bathroom controllers on page 11.
Notes on the Kitchen controller:
●
The Bathroom controller/s can be turned off from the Kitchen controller. Press
and hold the on/off button on the Kitchen controller for three seconds. This turns
off all the controllers and the displays go blank. If hot water is flowing from a hot
tap, it will go cold.
●
The controller cannot be turned on whilst a hot tap is open.
●
The Kitchen controller must have priority in order to adjust the temperature setting
on the Kitchen controller.
TEMPERATURE CONTROL
in use
in use
on
off
on
off
priority
priority
C
C
C
in use
priority
