INSTALLATION AND OPERATION INSTRUCTIONS
1-8
TANKLESS WATER HEATER 199
(c) MANUFACTURER REQUIREMENTS – GAS EQUIPMENT VENTING
SYSTEM PROVIDED. When the manufacturer of product-approved side-wall,
horizontally vented, gas-fueled equipment provides a venting system design or
venting system components with the equipment, the instructions provided by
the manufacturer for installation of the equipment and the venting system shall
include:
1. Detailed instructions for the installation of the venting system design or the
venting system components; and
2. A complete parts list for the venting system design or venting system.
(d) MANUFACTURER REQUIREMENTS – GAS EQUIPMENT VENTING
SYSTEM NOT PROVIDED. When the manufacturer of product-approved side-
wall, horizontally vented, gas-fueled equipment does not provide the parts for
venting the flue gases, but identifies “special venting systems,” the following
requirements shall be satisfied by the manufacturer:
1. The referenced “special venting systems” instructions shall be included with
the appliance or equipment installation instructions, and
2. The “special venting systems” shall be product-approved by the Board, and
the instructions for that system shall include a parts list and detailed installation
instructions.
(e) A copy of all installation instructions for all product-approved side-wall,
horizontally vented, gas-fueled equipment, all venting instructions, all parts lists
for venting instructions, and/or all venting design instructions shall remain with
the appliance or equipment at the completion of the installation.