background image

3/10

IMPORTANT SAFETY INFORMATION FOR CRIBS

CAUTION:

 ANY MATTRESS USED IN THIS CRIB SHOULD BE

       AT LEAST 27 1/4" X 51 5/8" WITH A THICKNESS

       NOT EXCEEDING 6".

WARNING

Do not use this crib if you cannot exactly follow the instructions
provided.

Do not use this crib for a child who can climb out of it or who is

taller than 35" (89cm).

Do not place in or near the crib any cord, strap or similar item that

could become wrapped around a child's neck.

Do not place this crib near a window or patio door where a child

could reach the cord of a blind or curtain and get strangled.

Check this crib regularly before using it, and do not use if any part
is loose or missing or if there are any signs of damage.

Do not substitute parts. Contact the manufacturer if replacement
parts or additional instructions are needed.

Children can suffocate on soft bedding. Do not place pillows,
comforters or soft mattresses in this crib.

Use a mattress that is thicker than 15cm in height, and when
pushed firmly against any side of the crib, there should not be a

gap of more than 3cm between the mattress and any part of any
other side of the crib.

Summary of Contents for LUCINE











Reviews: