10/10
STEP #4
TODDLER RAIL ASSEMBLY
STEP #4.1
Remove the rail frames of the crib by loosening all the
bolts installed as well as the mattress support.
STEP #4.2
Gently tilt the crib and release the bolts underneath the
metal brackets holding the stabilizer rails.
NOTE:
If mattress support is not in the lowest position,
loosen the mattress support bolts and move to the lowest
position.
STEP #4.3
On the inside face of both side panels there is a cavity for
the hook that corresponds to the hooks on both ends of
the toddler rails. Align and insert the hook of the toddler
rail into the cavity of the side panel. See
DETAIL I
.
STEP #4.4
Fill the holes located on the top of the side rail panel by
inserting bolt (EE) provided (packed inside toddler rail
box). (
DETAIL J
)
STEP #4.5
Repeat step #3 Installation of stabilizer rails into the side
panel (
DETAIL K
).
NOTE
: After assembly, re-tighten all bolts to a snug fit.
Allen Wrench = 1 pc
(EE) 1/4" x 1/2" BOLT = 4 pcs
HARDWARE FOR STEP #4:
(PACKED INSIDE TODDLER RAIL BOX)
I
J
DETAIL K
DETAIL J
DETAIL I
(EE)
(C)
Summary of Contents for LUCINE
Page 1: ...1 10 ...
