background image

LIMITED PRODUCT WARRANTY 

 
 

Reimann & Georger Corporation 

Hoisting and Construction Products 

 
 

A.

 

LIMITED WARRANTY 

 

Reimann & Georger Corporation (the “Manufacturer”) warrants to the original purchaser (the “Buyer”) that all Reimann & 
Georger Hoisting and Construction products shall be free of defects in material and workmanship for a period of one (1) 
year from date of original purchase. 

 

B.

 

MANUFACTURER’S OBLIGATIONS 

 

The Manufacturer’s sole obligation under this Limited Warranty is the repair or, at the Manufacturer’s discretion, the 
replacement of parts found to be defective.  Parts and equipment must have authorization from the Manufacturer prior to 
return to the Manufacturer or repair by an authorized service person.  Costs of transportation and other expenses 
connected with replacing or repairing parts are not covered under this Limited Warranty. 

 

C.

 

PARTS MANUFACTURED BY OTHERS 

 

This Limited Warranty does not cover any parts manufactured by others.  Such parts are subject to the warranty, if any, of 
their respective manufacturers, and are to be repaired only by a respective authorized service person for such parts.  The 
Manufacturer shall have no obligation to undertake repairs of parts manufactured by others. 

 

D.

 

NO SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES 

 

IN NO EVENT SHALL THE MANUFACTURER BE LIABLE TO THE BUYER OR ANY OTHER PERSON 
FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL LOSSES OR DAMAGES 
CONNECTED WITH THE USE OF THE PRODUCT UNDER THIS LIMITED WARRANTY.  SUCH 
DAMAGES FOR WHICH THE MANUFACTURER SHALL NOT BE RESPONSIBLE INCLUDE, BUT ARE 
NOT LIMITED TO, LOST TIME AND CONVENIENCE, LOSS OF USE OF THE PRODUCT, THE COST OF A 
PRODUCT RENTAL, COSTS OF GASOLINE, TELEPHONE, TRAVEL, OR LODGING, THE LOSS OF 
PERSONAL OR COMMERCIAL PROPERTY, AND THE LOSS OF REVENUE. 

 

E.

 

NO LIABILITY IN EXCESS OF PURCHASE PRICE 

 

IN NO EVENT SHALL THE MANUFACTURER’S OBLIGATIONS UNDER THIS LIMITED WARRANTY 
EXCEED THE PURCHASE PRICE OF THE PRODUCT. 

 

F.

 

NO EXTENSION OF STATUTE OF LIMITATIONS 

 

ANY REPAIRS PERFORMED UNDER THIS WARRANTY SHALL NOT IN ANY WAY EXTEND THE 
STATUTES OF LIMITATIONS FOR CLAIMS UNDER THIS LIMITED WARRANTY. 

 

G.

 

WAIVER OF OTHER WARRANTIES 

 

THE EXPRESS WARRANTIES SET FORTH IN THIS LIMITED WARRANTY ARE IN LIEU OF AND 
EXCLUDE ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT 
LIMITED TO, THE IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE. 

 

H.

 

PROCEDURE FOR WARRANTY PERFORMANCE 

 

If the product fails to perform to the Manufacturer’s specifications, the Buyer must provide the Manufacturer with the 
applicable model and serial numbers, the date of purchase, and the nature of the problem. 

9912 

 

Summary of Contents for HYDRAPAK HV1855C






















Reviews: