PTZ
User Manual
31
Rate (Kb/s):
Set the video bit rate (main stream default 4096Kb/s,64-12288Kb/s optional; secondary stream
default 1024Kb/s,64-10240Kb/s optional).
Frame rate (F/S)
: Set the video frame rate (primary/secondary stream default 25F/S,primary stream 5-60F/S
optional,secondary stream 5-30F/S optional ).
Key frame interval:
Set the key frame interval (primary/secondary stream default 75F,primary/stream 1-300F
optional. Secondary stream 1-150F optional).
Stream Name:
When streaming via rtsp or rtmp, user can modify stream name. Main Stream(live/av0), sub
stream(live/av1)
Click the "Save" button to display the "saved successfully" message,then settings take effect.
2) Stream Release
Switch:
To turn on/off the main/secondary stream.
Protocol:
primary / secondary stream applies RTMP protocol.
Host Port:
server port number (default 1935,0-65535 optional)
Host Address:
server IP addresses (default 192.168.5.11)
Stream Name:
choose a different stream name (live / av0,live / av1 optional).
User:
Set the user name.
Password:
Set the password.
Click on the "Save" button to display the "Save successful" message,then settings take effect.
Method of obtaining RTSP: rtsp: // device IP address: 554 / live / av0 (av0 main stream; av1 secondary
stream)
3) RTP Broadcasting
Main/Sub Stream:
On/off
；
Protocol:
RTP or TS
Address:
Default 224.1.2.3. It can be edited.
Port:
Main Stream Default Port: 4000
，
Sub Stream Default Port: 4002
）
Visit:
Address comes up after setting. Eg; rtp://224.1.2.3:4000
；
udp://@224.1.2.3:4000
；
4) Video Parameters
A.Focus: Focus mode,focus range,focus sensitivity can be set.
Focus Mode:
set the focus mode (the default auto,manual optional)
Focus range:
set the focus range (the default middle,the upper and lower optional)
Focus Sensitivity:
Set the focus sensitivity (default is low,high,medium optional)
B.Exposure:Eexposure mode,exposure compensation,back light compensation,anti‐flicker,gain
limit,wide dynamic, shutter speed,aperture value and brightness can be set.
Exposure Mode:
Set the exposure mode (the default automatic, manual, shutter priority, aperture priority,
Brightness priority optional)
Exposure compensation:
Exposure compensation setting is active when it is auto status (default is off).
Exposure compensation value:
Set the exposure compensation value,valid when it is set for auto(default 0,-7 to 7
optional).
BLC:
Set back light compensation,valid when it is auto status (default is off).
Anti‐flicker:
Set up anti-flicker mode,valid when status of automatic,aperture or brightness priority (default
50Hz,closed,60Hz optional).
Gain limit:
set the gain limits,auto,active when it is status of aperture or brightness priority(default 3, 0-15
optional).
Dynamic range:
set the dynamic range (default 5,0-8 optional).
Shutter speed:
active when it is status of manual or shutter-priority (default 1/100, 1/25, 1/30, 1/50, 1/60, 1/90,
1/100, 1/120, 1/180, 1/250, 1/350, 1/500, 1/1000, 1/2000, 1/3000, 1/4000, 1/6000, 1/10000 optional).
Aperture value:
Set the aperture value,active when it is status of manual or aperture-priority(default F1.8, closed,
F11, F9.6, F8.0, F6.8, F5.6, F4.8, F4.0, F3.4, F2 .8, F2.4, F2.0, F1.8 optional).
Brightness:
Set the brightness value,active when it is a state of brightness priority (default 7, 0-23 optional).
Summary of Contents for RGB12X-PTZ-WH
