28/30
Color Term: Set the color temp (red, green and blue), the adjustment range is 0~100.
Reset: Select “Reset”, the input property will be recover to factory setting.
Take
The take interface is shown as the figure below:
Set the transition time, and the adjustment range is 0~10S.
Slide the black out switch to enable or disable the black function. Auto take on is the default state. If select black out
and auto take on, the preview image will black or seamless switch to LED display instantaneously.
Click “Cut” or “Take”, the preview will be cut or seamless switch to LED display.
EDID
Click the EDID shortcut “
”, and pop-up window as follows:
The special display project or LED display application would like to require special resolution settings to meet the
requirement. Select the input or output board to read and write the EDID. As shown in the figure below:
