RGBlink CP 3072 User Manual Download Page 25

Page: 25 / 75

2. Hardware Orientation

CP 3072 Back Panel

CP 3072 User Manual 25

2. 6. 10. 14: CVBS Input

CVBS input, input standard video signal from players, cameras etc.

Support resolution 480i and 576i via BNC. Support standards include: PAL

and NTSC.

3. 7. 11. 15: HDMI/3G-SDI

Input

HDMI input, input the image signal from computer.

3G-SDI input, input video signal from HD camera and radio processing

equipment, connect SDI interface via 75 ohms impedance BNC port.

4. 8. 12. 16: VGA Input

VGA input, input the video signal from HD player and Computer, etc.

Compatible with YPbPr signal, input signal via the DB15 interface.

OUTPUT Interface

27: HDMI Program Output

HDMI output interface, used to connect to the display device, video

processor or matrix.

：

VGA Program Output

Connect to the monitor or LED display which has VGA interface.

(This VGA connector does not support hot-plugging)

31: CVBS Program Output

CVBS can output PAL and NTSC, output signal can access to TV, and the

device with CVBS input. Can choose aspect ratio 4:3 or 16:9.

26: HDMI Preview Output

HDMI output interface, used to connect to the display device, video

processor or matrix.

28: VGA Preview Output

Summary of Contents for CP 3072












































































Search results

Summary of Contents for CP 3072

Reviews:

Related manuals for CP 3072

Brands by name

Popular brands

RGBlink CP 3072, User Manual

Search results

Summary of Contents for CP 3072

Reviews:

Related manuals for CP 3072

Brands by name

Popular brands