RGBlink CP 3072 User Manual Download Page 46

Page: 46 / 75

5. System Setup and Operations

Interface and Input Signal Option

CP 3072 User Manual 46

26.

HDMI preview output, used to connect to the display device, video

processor or matrix.

28.

VGA preview output, connect to monitor or projector which with VGA

interface.

30.

HDMI PVW output, used to connect to the display device, video

processor or matrix.

1. 5. 9. 13. USB input,

can access the USB device or mobile hard disk with

USB storage function. Support general image and video formats. (CP 3072

V1.1 can only support video formats)

2. 6. 10. 14. CVBS output,

receive standard video signal from players,

cameras etc. Input supported resolution 480i and 576i via BNC. Supported

standards include: PAL and NTSC.

3. 7. 11. 15. HDMI Input,

input the video signal from HD player, DVD,

computer, set top box and hard disk, etc. (Only for CP 3072)

3. 7. 11. 15. 3G-SDI Input,

input video signal from HD camera and radio

processing equipment, connect SDI interface via 75 ohms impedance BNC

port. (Only for CP 3072S)

4. 8. 12. 16. VGA (DB15 Port),

can support HD player, computer, video

signal. Through the DB15 interface input signal.

18.

Power

：

AC 85-264V, 50/60Hz, IEC-3 power interface.

Summary of Contents for CP 3072












































































Search results

Summary of Contents for CP 3072

Reviews:

Related manuals for CP 3072

Brands by name

Popular brands

RGBlink CP 3072, User Manual

Search results

Summary of Contents for CP 3072

Reviews:

Related manuals for CP 3072

Brands by name

Popular brands