11
•
Fonts
– selecting the display font.
•
Temperature offset
– configuration of the environment temperature offset .
•
Display synchronization
– configuration of the display (content) synchronization, of selecting the operation modes, and of the
field of the master clock IP address (required for the Slave operation modes).
2.3.
Alarms tab
This tab allows you to configure the parameters connected with the alarms.
•
Set alarm
– configuring a single alarm (activating, the operating time, the duration, the mode, the days of the week).
•
Alarms
– status of all available alarms.
The meanings of the alarm status symbols are described in
Tab. 3.
Tab. 3.
Alarm status symbols
Symbol
Colour
Meaning
red
not set, inactive
yellow
set, inactive
green
set, active
2.4.
Advanced tab
This tab allows you to configure the advanced parameters of the device.
Clock name
– an individual clock name.
Network
– network settings (the IP address, the subnet mask, the default gateway).
Password
– setting the user password.
Default settings
– restores the factory settings.
NOTE!
The
"Default settings"
function fully restores the factory settings, including resetting the alarm and making the default
network configuration.
2.5.
Status tab
This tab allows you to read the device status.
Date & time
– reading the time and the date.
Sensors
– reading the sensors: the temperatures and the environment brightness.
GPS status
– reading information about the signal strength or disconnection of the GPS module.
Network
– reading the network interface configuration.
Device
– reading the software version, hardware version, an individual clock name and product name.
Summary of Contents for ZA series
Page 7: ...7 ...
