RGB Technology ZA series, Operation Manual

Page: 12 / 12

12
3. Default network settings
Tab. 4 shows the network settings of the Prestige Line clock. Restoring the factory settings is possible using the respective function in
the user menu or in the “Website”.
Table 4. Default network settings
Parameter Default value
User admin
Password dbps
IP address 192.168.0.11
Subnet mask 255. 255. 255.0
Default gateway 192.168.0.1
4. Master Mode configuration
The ZA, ZB and ZAH, ZBH series clocks allow local synchronization of the slave clocks with the master clock. Tab. 5 shows a sample
configuration of clocks. NOTE! Time server IP addresses can be entered by the user only via the "Website".
Tab. 5. Master Mode configuration
Master clock (Master) Slave clock (Slave)
Master Mode active inactive
Synchronization
source GPS or Ethernet Ethernet
Comments
When you choose the Ethernet as the
synchronization source, the Time server boxes from
1 to 5 should include sever addresses compatible
with NTP. In the Time server box 1, you should enter the master
clock (Master) IP address. The Time server IP boxes
from 2 to 5 should be filled in with the addresses
0.0.0.0
5. Changing the language of web page
To change the language, click at the bottom right corner on a flag symbolising the language. Available languages are Polish
and English (default). After clicking on the desired flag, next to it should be displayed an information “
Ustawiono język
polski
” or “
Set english language
”, which means the correct language setting in the memory clock (feedback from the device).