Installation Instruction
APT1-1
Antenna Tilt Adjustment Tool
CELaligner
®
April 7, 2006 V800 Vers 1.1
Radio Frequency Systems
Please visit us on the internet at http://www.rfsworld.com
T h e C l e a r C h o i c e i n W i r e l e s s
T M
Easy to Fasten
The
CELaligner
®
is equipped with an elastic belt for
easy fastening on the antenna, and for hands free
operation, thus assuring optimized security when
working up in the mast with panel antennas and
CELaligner
®
. (Fig. 1)
Elevation
The built-in level vial helps you to precesily set the
elevation of the antenna. (Fig. 2)
1. Adjust to required elevation angle on the
graduated arc.
2. Place
the
CELaligner
®
on the rear side of the
antenna.
3. Tilt the antenna until the vial is in level.
Azimuth
Having found a reference point on a map and hereafter
determinated the offset from the reference point to the
decided direction, you adjust the angle on the
fraduated arc located on the
CELaligner
®
.(Fig. 3)
When having fastened the
CELaligner
®
to the panel
antenna, it is time for adjusting the direction of the
antenna by using the tracking sight. (Fig. 4)
Adjustment Guideline
1.
Find reference point on map in horizon (e.g. church tower).
2.
Determine offset (degrees) from reference point to required beam direction.
3.
Adjust the angle on graduated arc on the
CELaligner
®
(offset).
4. Mount
the
CELaligner
®
on the panel antenna. Adjust the antenna by using the tracking sight.
