13
Remember that after every configuration change, it is necessary to:
-
Click
Update
on the page.
-
Reboot
AP1001g.
The changes take effect only
AFTER Reboot
.
Protocol
Filter AppleTalk Packet:
Filter IPX Packet:
Wireless Isolation:
Filter AppleTalk Packet
: Selecting this option will disallow all AppleTalk packets to pass through
Filter IPX Packet
: Selecting this option will disallow all IPX packets to pass through
Wireless Isolation
: Selecting this option will disallow wireless clients associated with this device
to communicate with each other
Miscellaneous
Enable
Telnet:
Button Mode:
Request Internet Access
Restore Good
Settings
Save the current settings as a backup:
Restore settings from the backup:
Enable Telnet
: Disable/enable Telnet access to this device
Request Internet Access
: TBA
Restore Good Setting
: Restore last known good setting
Save the current setting as a backup
: After you have successfully configured AP1001g, you
can save this “Good Config” into memory. You can retrieve this “Good Config” later, if you have
messed up some settings and do not know what was the previous working setting. If you have
even forgotten the password to get into the configuration pages, you would have to do a Factory
Reset to AP1001g.
