The information contained in this document is subject to change. This document contains proprietary information, which is protected by copyright
laws. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language or program language
without prior written consent of RFI Engineering B.V.
QIG_S-gateway_v1.30.docx
Page: 3(
11)
3 Introduction
The S-gateway is a Picocell, indoor LoRa gateway for enterprise and lightweight industrial
applications that require Always On connectivity for Internet of Things (IoT) applications. It is very
low cost and it is very easy to setup making it ideal for zero-touch high volume deployments. LoRa
provides a low-cost way to connect battery operated devices to the network infrastructure.
LoRa® RF technology has been pioneered by Semtech and is a 2-way wireless solution, operating
in the license exempt ISM bands, that complements M2M cellular infrastructure. It provides a low-
cost way to connect battery operated and mobile devices to the network infrastructure.
The S-gateway uses a command line management system whereby you can configure the unit
through the command line interface using SSH.
This document provides information on the following topics:
•
S-gateway hardware identification.
•
S-gateway hardware installation.
•
S-gateway logging into the command line interface using SSH.
•
Configuring a LoRaWAN server
3.1
Check Your Package Contents
These are the items included with your S-gateway purchase:
S-gateway with 3dBi omni antenna
5V mains adapter with
interchangeable heads for
use in different countries
