The information contained in this document is subject to change. This document contains proprietary information, which is protected by copyright
laws. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language or program language
without prior written consent of RFI Engineering B.V.
QIG_S-gateway_v1.30.docx
Page: 11(
11)
APT-Manual-Installed: no
APT-Sources: http://apt.rfi-engineering.com/apt/debian stretch/embedded armel Packages
Description: [generated from Rust crate s-gateway-rfi-build]
Test
Below is an example of a full software upgrade performed on an S-gateway.
rfi@s-gateway
:
~
$ sudo apt-get update
Ign:1 http://cdn-fastly.deb.debian.org/debian stretch InRelease
Get:2 http://cdn-fastly.deb.debian.org/debian stretch Release [118 kB]
Get:3 http://apt.rfi-engineering.com/apt/debian stretch InRelease [1,625 B]
Get:4 http://cdn-fastly.deb.debian.org/debian stretch Release.gpg [2,434 B]
Get:5 http://apt.rfi-engineering.com/apt/debian stretch/embedded armel Packages [827 B]
Get:6 http://cdn-fastly.deb.debian.org/debian stretch/main armel Packages [6,884 kB]
Get:7 http://cdn-fastly.deb.debian.org/debian stretch/main Translation-en [5,384 kB]
Fetched 12.4 MB in 1min 19s (156 kB/s)
Reading package lists... Done
rfi@s-gateway
:
~
$ sudo apt-get install s-gateway-rfi-build
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be upgraded:
s-gateway-rfi-build
1 upgraded, 0 newly installed, 0 to remove and 29 not upgraded.
Need to get 1,039 kB of archives.
After this operation, 21.5 kB of additional disk space will be used.
Get:1 http://apt.rfi-engineering.com/apt/debian stretch/embedded armel s-gateway-rfi-build armel
1.1.0 [1,039 kB]
Fetched 1,039 kB in 0s (1,090 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
(Reading database ... 13677 files and directories currently installed.)
Preparing to unpack .../s-gateway-rfi-build_1.1.0_armel.deb ...
Unpacking s-gateway-rfi-build (1.1.0) over (1.0.6) ...
Setting up s-gateway-rfi-build (1.1.0) ...
rfi@s-gateway
:
~
$
Figure 7: Example of a successful upgrade of an S-gateway
