RFI Multimax+, User Manual

Page: 84 / 139

Multimax_user manual_v.4.0.4 July. 11, 2018 84/139
Confidential
Item Description Setting
Enable PPTP Server Click the toggle button to
enable PPTP VPN server. ON
Username Enter the username which will
be used by L2TP client. Enter accordingly
Password Enter the password provided
by your PPTP server. Enter accordingly
Authentication Select
from”pap”,”chap”,”mschap
v1” and ”mschap v2”.
Enter accordingly
Enable NAT Click the toggle button to
enable NAT option for PPTP. ON
All traffic via This Interface Turn on to use tunnel as
default gateway OFF
Remote subnet The subnet used by the
remote end of the tunnel
(remote end local LAN) Enter accordingly
Remote subnet mask The subnet mask used by the
remote end of the tunnel. Enter accordingly
Expert Options Enter expert options of PPTP
VPN in this field. None
3.8.5 VPN > L2TP
L2TP ( “Layer 2 Transport Protocol”) is a form of VPN developed by Cisco Systems that can carry
traffic not seen in most other tunnelling protocols. Because it is Layer 2 based, it can “bridge”
physically separated networks and make them appear as a single network. This protocol can
transport non-IP packets such as ARP and other broadcast-based protocols.
Multimax can be both an L2TP client and/or an L2TP server.