RFI Multimax+, User Manual

Page: 57 / 139

Multimax_user manual_v.4.0.4 July. 11, 2018 57/139
Confidential
Serial Port
Item Description Default
Serial Port Application Settings
Index Indicate the ordinal of the list. --
Port Show the current serial’s name, read only. --
Enable Click the toggle button to enable/disable this serial port. When the status is OFF,
the serial port is not available. OFF
Baud Rate Select from “300”, “600”, “1200”, “2400”, “4800”, “9600”, “19200”, “38400”,
“57600” , “115200” or “230400”. 115200
Data Bits Select from “7” or “8”. 8
Stop Bits Select from “1” or “2”. 1
Parity Select from “None”, “Odd” or “Even”. None
Flow control Select from “None”, “Software” or “Hardware”. None
Data Packing
Packing Timeout Set the packing timeout. The serial port will queue the data in the buffer and
send the data to the Cellular WAN/Ethernet WAN when it reaches the Interval
Timeout in the field.
Note : Data will also be sent as specified by the packet length even when data is
not reaching the interval timeout in the field.
50
Packing Length Set the packet length. The Packet length setting refers to the maximum amount
of data that is allowed to accumulate in the serial port buffer before sending.
When a packet length between 1 and 3000 bytes is specified, data in the buffer
will be sent as soon it reaches the specified length. 1200

The window is displayed as below when choosing “Transparent” as the application mode and
“TCP Client” as the protocol.
The window is displayed as below when choosing “Transparent” as the application mode and
“TCP Server” as the protocol.