RF-System TinyGate, Assembly And User'S Manual

Page: 8 / 82

TinyGate - User's manual and assembly instructions
Technical characteristics
•
3-in-1 USB interface, just only one USB cable to your PC: built-in USB
2.0 High speed Hub
•
Full galvanic isolation between radio and USB interface
•
Integrated USB sound device:
The power supply from the USB host is filtered additionally to keep a low
noise on the A/D and D/A converters
Supported by the following operating systems: Windows XP, Windows 7,
Windows 8, Windows 10, Macintosh OS X and LINUX.
Compliant with USB Audio Device Class Specification v1.0, there are no
custom device drivers necessary.
•
Provides 2 independant integrated USB COM-Ports:
1) CAT/CI-V serial interface:
Support for following radio control ports: CI-V, FIF-232, IF-232
(RXD+TXD)
Supported by the following operating systems: Windows XP, Windows 7,
Windows 8, Windows 10, Macintosh OS X and LINUX.
2) PTT/SQL/CW/FSK interface :
Squelch(COR) input, positive or negative logic (for Echolink and remote
control applications)
PTT relay output: direct keying control without VOX circuit
CW/FSK solid state output (can also be used as PTT: The smart jumper
system allow to use either a relay or a solid state output as PTT)
Supported by the following operating systems: Windows XP, Windows 7,
Windows 8, Windows 10, Macintosh OS X and LINUX.
•
Controls for receiver and transmitter audio level
•
Quick change USB and Radio interface connectors
•
RJ45 connector for transceiver connection with a flexible pin selection
jumper socket (attached to MIC connector, accessory or data port works
with virtually all transceiver). A detachable radio cable can be made eas-
ily with a standard unterminated RJ45-FTP network patch cable (get a
P a g e 8