SCORPION LoRa Transmitter
DS-SCORPION-1 Page 5
Configuring Modes of Operation
To configure the modes of operation, undo the
six enclosure fixing screws to access the inter-
nal circuit board.
The SET switch is used to configure the operat-
ing modes
Note: please also see the Video on our website!
SET
Switch
Antenna
LED1
LED2
LED3
Flashes
constantly
in setup
Restore SCORPION to Factory Default Setings
Briefly Press
SET Sw
LED1 ON
Constantly
Press & Hold
SET Sw
For 10 Secs
The Following Modes can be configured using the SET Switch
1.
RF Mode of Transmission (FM or LORA Mode)
2.
Acknowledgement back from the Receiver
3.
Automatic Watchdog Transmissions
4.
Continuous or State Change Transmission
SCORPION Transmitters are factory Shipped with the following Settings
RF Transmission
FM
Acknowledgment
OFF
Watchdog
OFF
Transmission Type
Continuous
