MAINSLINK-PRO
Disclaimer:
Whilst the information in this document is believed to be correct at the time of issue, RF Solutions Ltd does not accept any liability whatsoever for its accuracy, adequacy or completeness. No
express or implied warranty or representation is given relating to the information contained in this document. RF Solutions Ltd reserves the right to make changes and improvements to the
product(s) described herein without notice. Buyers and other users should determine for themselves the suitability of any such information or products for their own particular requirements or
specification(s). RF Solutions Ltd shall not be liable for any loss or damage caused as a result of user
’
s own determination of how to deploy or use R F Solutions Ltd
’
s products. Use of RF
Solutions Ltd products or components in life support and/or safety applications is not authorised except with express written approval. No licences are created, implicitly or otherwise, under any
of RF Solutions Ltd
’
s intellectual property rights. Liability for loss or damage resulting or caused by reliance on the information contained herein or from the use of the product (including
liability resulting from
negligence or where RF Solutions Ltd was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict QuasarUK Ltd
’
s liability for death or
personal injury resulting from its negligence.
Important European compliance information
This RF Solutions product meets the essential requirements of the European Radio Equipment Di-
rective 2014/53/EU and has been tested to European Harmonised Standards and CE marked accord-
ingly. A copy of the EU Declaration of Conformity can be located on the RF Solutions Website,
www.rfsolutions.co.uk/certification-i59
36.00
88.00
88
.0
0
~
25
.0
0
30.00
Dims in mm
Fixing Instructions:
1.Fix the rear of the MAINSLINK-PRO enclosure to the wall using the template above.
2.Ensure that all fixing screws are screwed flush to the enclosure.
3.Ensure that the screw covers are put in place. These ensure water proofing and insulate the
PCB from the wall fixing screws. Screw Covers are found inside the rear of the enclosure.
4.Once the enclosure is fixed to the wall, screw on the front plate with the PCB in place.
Dimensions and Wall mounting information:
MAINSLINK-PRO is a professional use product and should only be installed by a competent
person. The product must be FIXED to the wall (EN60950 4.1)
RF Solutions Ltd. Recycling Notice
Meets the following EC Directives:
DO NOT
Discard with normal waste, please recycle.
ROHS Directive 2002/95/EC
Specifies certain limits for hazardous substances.
WEEE Directive 2002/96/EC
Waste electrical & electronic equipment. This product must be disposed of through a licensed WEEE collection point. RF
Solutions Ltd., fulfils its WEEE obligations by membership of an approved compliance scheme.
