CARLTON FM/LoRa Transmitter
DS-CARLTON-2 Page 5
Configuring Modes of Operation
To configure the modes of operation, unscrew
the six enclosure fixing screws to access the
internal circuit board.
The SET switch is used to configure the
operating modes
SET
Switch
Antenna
LED1
LED2
LED3
Flashes
constantly
in setup
The Following Modes can be configured using the SET Switch
1.
RF Mode of Transmission (FM or LORA Mode)
2.
Acknowledgement back from the Receiver
3.
Automatic Watchdog Transmissions
4.
Continuous or State Change Transmission
CARLTON Transmitters are factory Shipped with the following Settings
RF Transmission
FM
Acknowledgment
OFF
Watchdog
OFF
Transmission Type
Continuous
Restoring CARLTON to Factory Default
Press SET Sw
1X
LED1
flashes 1x
Press SET Sw
For 10 Secs
