CARLTON FM/LoRa Transmitter
DS-CARLTON-2 Page 3
CARLTON is factory shipped with the following default settings
FM RF Transmission
Acknowledgement not requested
Watchdog Inactive
Continuous Transmission when Switch pressed
Operation
Press any of the switches to operate.
The Transmitter will auto sleep between operations to save power
The LED’s indicate the following:
RF Transmit
GREEN
LED operates when CARLTON is transmitting an RF signal
RF Acknowledge (if configured)
:
GREEN LED
will Flash at high speed to indicate that an acknowledgment
has
successfully been received back form the receiver
RED LED
will Flash at high speed to indicate that an acknowledgment
has not
been
received back form the receiver
Low Battery
: If battery requires recharging Low Battery LED illuminates for 3 seconds after
each operation.
RF Transmit (Green LED)
RF acknowledge from
receiver (Green/Red) LED)
Low Battery
