RF Mogul RFM-1000, Technical Manual

Page: 12 / 20

RFM-1000/1100 Technical Manual
12
Raising the mount using a DC Voltage source direct to control cable
GREY
Control Cable
BLACK
Control Cable
IGNITION STOW
(OPTIONAL)
P1 = To Positive side of Battery 12VDC
P2 = To + 12 VDC side of car ignition when ON
P3 = To Ground of Battery
P4 = To Ground of Battery
2+ 1+
4- 3-
When wired in this manner and you turn your ignition key ON, your dish will automatically return to the STOWED
position which is the travel position.
BLACK
CONTROL CABLE
(Green Connector)
Pin Color How Used Where Used
9 = RED Power AZ-B
10 = ORANGE Power AZ-A/Skew
11 = BROWN or Tan Power EL-B
12 = BLACK Power EL-A/Skew
TO RAISE THE MOUNT WITH
A BATTERY

ELEVATION Brown and Black will
raise and lower the mount

AZIMUTH Red and Orange will rotate
the dish in.

SKEW Orange and Black will tilt dish.
GREY
CONTROL CABLE
(Green Connector)
Pin Color How Used Where Used
9 = WHITE Power AZ-B
10 = PINK Power AZ-A/Skew
11 = Lt BLUE or Tan* Power EL-B
12 = ORANGE Power EL-A/Skew
TO RAISE THE MOUNT WITH
A BATTERY

ELEVATION Orange and Lt Blue (or
tan) will raise and lower the mount

AZIMUTH Pink and White will rotate
the dish in.

SKEW Orange and Pink will tilt dish.
*
Tan will substitute for Lt Blue when Lt Blue is
not present. This will be on grey control cables
longer than 15'.