background image

Form CP-OPT-GMK (6-16), P/N 208831 R3, Page 4

Specifications & illustrations subject to change without notice and without incurring obligations.

 

©Nortek Global HVAC, LLC 2016.  All rights reserved.
All marks are the property of their respective organizations. 

O’Fallon, MO I Printed in U.S.A. (6/16)

 

FORM CP-OPT-GMK (6-16), PN208831 R3

 

 





 








 

  

­­

 

 





  



 



 



Summary of Contents for SC Series

Page 1: ... Wired Flue Duct Combustion Air Damper Assembly with Gear Motor P N 207975 or P N 207976 three Replacement Gaskets Flue Outlet Duct Gasket P N 31900 Use when attaching the new flue duct assembly to the collection box NOTE Be sure to reuse the restrictor plate Venter Seal Gasket P N 44695 Use when re installing venter housing on side of flue duct Cover Plate Gasket P N 41996 Use when reattaching co...

Page 2: ...k wire that connects the combustion damper lower end switch to Terminal 88 c Remove the flue duct cover plate from the flue duct and damper assembly Model SC Series only Disconnect the rubber tubing from the sensing probe on the flue duct cover plate d Remove the flue duct combustion air damper and solenoid actuator as an assembly Remove the screws attaching the flue duct to the collection box and...

Page 3: ...of the new combustion damper upper end switch Connect the orange wire from the heater control compartment Terminal 84 to the common terminal of the new combustion air damper lower end switch Connect the purple wire from the normally open terminal of the new combustion air damper upper end switch to Terminal 88 in the heater control compartment Connect the black wire from the normally open terminal...

Page 4: ...illustrations subject to change without notice and without incurring obligations Nortek Global HVAC LLC 2016 All rights reserved All marks are the property of their respective organizations O Fallon MO I Printed in U S A 6 16 FORM CP OPT GMK 6 16 PN208831 R3 ...

Reviews: