4
RP-HRPD-IOM (07-22) 132210-B
GENERAL INFORMATION—CONTINUED
Important Safety Information
Please read all information in this manual thoroughly and become familiar with the capabilities and use of your
appliance before attempting to operate or maintain this unit . Pay attention to all dangers, warnings, cautions, and
notes highlighted in this manual . Safety markings should not be ignored and are used frequently throughout to
designate a degree or level of seriousness .
DANGER:
A danger statement describes a potentially hazardous situation that if not avoided, will result in severe
personal injury or death and/or property damage .
WARNING:
A warning statement describes a potentially hazardous situation that if not avoided, can result in severe
personal injury and/or property damage .
CAUTION:
A caution statement describes a potentially hazardous situation that if not avoided, can result in minor
or moderate personal injury and/or property damage .
NOTE:
A note provides important information that should not be ignored .
⚠ DANGER ⚠
• Gas-fired appliances are not designed for use in hazardous atmospheres containing flammable
vapors or combustible dust, in atmospheres containing chlorinated or halogenated hydrocarbons,
or in applications with airborne silicone substances.
• Improper installation, adjustment, alteration, service, or maintenance can cause property damage,
injury, or death. Read these installation, operation, and maintenance instructions thoroughly
before installing or servicing this equipment.
⚠ WARNING ⚠
For your safety, read the warning labels on the unit.
⚠ CAUTION ⚠
These duct furnaces are not certified or approved for use in drying or process applications. If a
duct furnace is to be used in a drying or process application, contact the factory for application
guidelines and for manufacturer’s authorization. Without factory authorization, the warranty is
void and the manufacturer disclaims any responsibility for the duct furnace and/or the application.
NOTES:
• Installation should be done by a qualified agency in accordance with the instructions in this
manual and in compliance with all codes and requirements of authorities having jurisdiction.
• Read this manual and become familiar with the installation requirements of your particular
furnace. If you do not have knowledge of local requirements, check with the local gas company
or any other local agencies who might have requirements concerning this installation.
• The instructions in this manual apply only to duct furnace models RP and HRPD.
Installation Codes
These units must be installed in accordance with local building codes . In the absence of local codes, in the United
States, the unit must be installed in accordance with NFPA/ANSI Z223 .1 (latest edition),
National Fuel Gas Code
.
A Canadian installation must be in accordance with CSA B149 .1,
Natural Gas and Propane Installation Code
. This
code is available from CSA Information Services, 1-800-463-6727 . Local authorities having jurisdiction should be
consulted before installation is made to verify local codes and installation procedure requirements .
