1x4 Trim
24"
22-3/8"
Back of Building
Important:
When installing trusses
place the gusset on the line.
When marking the wall plates, place
the 'x' on the correct side of the lines
to keep the trusses parallel.
24"
Measure from outside of 1x4 Trim
Step 13
Layout Roof Trusses
1.
Draw a line where the trusses will
be positioned. Mark an 'X' to the
side of this line.
2.
From the first line, draw more lines
24" apart and put an 'X' to the side
of these lines. This will place the
trusses 24" on center.
3.
When installing trusses, position
the wood gusset on the line.
Step 14 Set Rear Gable
1.
Install gable on the back wall. Secure
bottom of gable by nailing gable
blocks to wall plate.
2.
Nail the bottom edge of the siding
into the 1x4 trim. Use 8d galv. nails.
Important: Bottom edge of gable
siding extends over 1x4 trim